CAD design

ISO 2768: what general tolerances on a drawing mean — and what changes in 2026

What ISO 2768-m and -mK mean on a drawing, the table values for f and m, and what changes with ISO 2768:2026 and ISO 22081.

Date
Reading time
9 min
Author
Konstantin Vinogradov
CAD render of the KANID SoloMeter 2.0 with a tripod and a seat for the surveyor’s folding rule (provisional header image; a motif of general tolerances will follow)

On many manufacturing drawings there is a short line in the title block such as “ISO 2768-m” or “ISO 2768-mK”. It governs all dimensions that have no tolerance of their own. If you do not understand that line, you only half understand the drawing.

In November 2026 ISO published a new edition of it. In this post I explain what the indication means, which values stand behind it, and what you should watch for on new drawings.

What general tolerances are

No part is manufactured exactly to the nominal size. Every dimension therefore needs a permissible deviation. It would be tedious and unclear, though, to write a tolerance of its own on every dimension. General tolerances solve that: an indication in or next to the title block sets which deviation applies to all dimensions without a tolerance of their own. Only where the function needs a tighter tolerance is it stated directly on the dimension.

What “m” and “K” mean

ISO 2768 has four tolerance classes for linear and angular dimensions:

“ISO 2768-m” therefore means: for all linear and angular dimensions without a tolerance of their own, the medium class applies.

The capital letter in “ISO 2768-mK” comes from the former Part 2 of the standard. It governed general geometrical tolerances in the three classes H, K and L. ISO already withdrew that Part 2 in February 2021 (more on that below).

The table values for linear dimensions

For the two most commonly used classes, f and m, these limit deviations apply:

Nominal size range (mm) f (fine) m (medium)
0.5 to 3 ±0.05 mm ±0.1 mm
over 3 to 6 ±0.05 mm ±0.1 mm
over 6 to 30 ±0.1 mm ±0.2 mm
over 30 to 120 ±0.15 mm ±0.3 mm
over 120 to 400 ±0.2 mm ±0.5 mm
over 400 to 1000 ±0.3 mm ±0.8 mm
over 1000 to 2000 ±0.5 mm ±1.2 mm
over 2000 to 4000 – ±2 mm

Values according to DIN ISO 2768-1: TU Munich, general tolerances according to DIN ISO 2768-1 (PDF) (retrieved 19 November 2026).

An example: a dimension of 100 mm with the indication “ISO 2768-m” falls in the range over 30 to 120 mm. ±0.3 mm is permissible, so 99.7 to 100.3 mm.

For nominal sizes below 0.5 mm the standard does not set a general tolerance. There the tolerance belongs directly on the dimension.

What changes with ISO 2768:2026

On 9 November 2026 ISO published ISO 2768:2026. It replaces ISO 2768-1 of 1989, which ISO withdrew on the same day. The new edition is in a single part and has a new title: tolerance limits for the general specification of linear sizes and angular sizes.

The most important changes are named in the amendment note to the German draft DIN EN ISO 2768:2025-09:

  1. Sizes only. The standard applies to linear sizes from 0.5 to 4000 mm and to angular sizes. A size is, for example, a diameter, a width or a thickness. According to ISO, it does not apply to distances, for example the distance between two hole centres. In the assessment of the Bundesverband Metall, step dimensions are also no longer covered.
  2. No more values for broken edges, radii and chamfers. The previous table for that has been deleted.
  3. Independent of material and process. Previously the standard was aimed at machined parts and sheet-metal parts. The new edition applies independently of material and manufacturing process.
  4. No longer a section on rejection. Previously, a part that exceeded a general tolerance was not automatically to be rejected, as long as its function was not impaired. That Section 6 has been deleted.
  5. Aligned with the ISO GPS system. The standard can be applied alone or together with ISO 22081.

The numerical values themselves remain. The Bundesverband Metall writes that the four classes f, m, c and v and the tolerance values for linear and angular sizes are retained. DIN’s amendment note also names no change to the values.

Status in Germany (19 November 2026): The final German standard DIN EN ISO 2768 has not yet been published. DIN lists it as a current project; what has been published so far is the draft E DIN EN ISO 2768:2025-09, which is intended to replace DIN ISO 2768-1:1991-06. DIN still lists DIN ISO 2768-1:1991-06 as the current standard. The English ISO 2768:2026-11 is also available from DIN Media.

And the “K”? ISO 22081 and DIN 2769

ISO withdrew the former Part 2 with the classes H, K and L on 4 February 2021; as successor ISO names ISO 22081:2021. In Germany it has been published as DIN EN ISO 22081:2022-10 and replaces DIN ISO 2768-2:1991-04. DIN Media points out, however, that ISO 22081 is not a direct replacement in content for the old Part 2, and recommends referring to DIN ISO 2768-2 with a date.

ISO 22081 describes how general geometrical specifications and general size specifications are set, but does not itself state tolerance values. The values are set by the user. For that purpose Germany has the complementary DIN 2769:2023-04, with tolerance classes and table values that, according to DIN, can be applied independently of technology and material. Its classes and values differ from those of ISO 2768.

In practice that means: the indication “ISO 2768-mK” refers, for half of it, to a standard that has no longer existed internationally since 2021.

What I recommend for new drawings

Existing drawings with “ISO 2768-mK” will remain in circulation for a long time, and manufacturers know the indication. For new drawings I consider four things useful:

  1. Always state the general tolerance. Without an indication in the title block it is open which deviation applies to dimensions without a tolerance of their own.
  2. Date the reference to the standard. Under the same number “ISO 2768” there are now two editions with the same values but a different scope. If you stay with the old indication, add the year of issue so that it is clear which edition is meant. If you switch to the new system, refer to ISO 22081 and state the values, for example according to DIN 2769. Best agree this with your manufacturer.
  3. Check distances, chamfers and radii. Under the new ISO 2768, distances such as hole-centre distances, as well as chamfers and radii, are no longer covered. Where these dimensions matter for the function, they need an indication of their own, for example a position tolerance.
  4. Tight only where the function requires it. Every tight tolerance makes manufacture and inspection more involved. Fits, bearing seats and sealing faces get a tolerance of their own; the rest get the general tolerance. More on that in the post Design for manufacture in CAD.

That the new edition applies independently of the process does not, by the way, mean that every process can achieve every class. A 3D-printed part reaches different accuracies from a milled part. Which class is sensible depends on the process and the material. How differently materials behave is shown in the post Thermal expansion in design.

How I handle this at KANID

I design in Onshape. You review models and drawings via a link in the browser, without a CAD licence of your own. At the end of phase 2 you receive manufacturing drawings, a bill of materials and CAD data (PDF, DWG, STEP) for manufacturers and suppliers. I put tolerances where the function needs them, and the general tolerance is stated clearly in the title block. What other data a manufacturer needs is in the post STL or STEP?.

The starting point is phase 1, concept & feasibility: 1,450 € incl. 19% VAT as a fixed price, duration about 3–4 weeks. It ends with a binding fixed-price quote for phase 2 (as a guide, from about 5,000 € net plus VAT). Details are under Services and in the post Product development at a fixed price.

In brief

What does ISO 2768-m mean?

For all linear and angular dimensions without a tolerance of their own, tolerance class m (medium) applies. A dimension of 100 mm may then deviate by ±0.3 mm, so it may lie between 99.7 and 100.3 mm.

What does ISO 2768-mK mean?

m is the class for linear and angular dimensions from Part 1, K the class for general geometrical tolerances from Part 2. ISO withdrew Part 2 in February 2021; the successor is ISO 22081.

Does ISO 2768-1 still apply?

Internationally, ISO withdrew ISO 2768-1:1989 on 9 November 2026 and replaced it with ISO 2768:2026. In Germany, DIN still lists DIN ISO 2768-1:1991-06 as the current standard; the German revision DIN EN ISO 2768 so far exists only as a draft (edition 2025-09) (as at 19 November 2026).

Have the tolerance values changed?

According to the Bundesverband Metall and DIN’s amendment note, no: classes f, m, c and v and their values remain. What has mainly changed is what they apply to: only to sizes, no longer to distances, chamfers and radii, but independently of material and manufacturing process.

What replaces ISO 2768-2?

ISO 22081:2021, in Germany DIN EN ISO 22081:2022-10. It does not itself state tolerance values. In Germany, table values for that purpose are provided by DIN 2769:2023-04.

Sources

All retrieved on 19 November 2026.

ISO 2768general tolerances ISO 2768ISO 2768-mISO 2768-mKISO 2768 tableISO 2768:2026CAD design

← Back to the overview

KANID UG
Filderstadt
Sheet
03 / 17
Rev.
Scale
1:1
Title
Blog · CAD design
Drawing no.
KANID-WEB-2026-03
Drawn by
K. Vinogradov
Material / standard
HTML · WCAG 2.1 AA