General terms and conditions

This is a convenience translation. Only the German version is legally binding.

For business customers · as of 11/2026

Scope: These terms apply to product development (phase 1 concept & feasibility, phase 2 development through to the pre-series prototype), design work and technical consulting for businesses. Contracts with consumers for these services are governed by the terms for consumers. Goods from our shop are bought at kanid-factory.de; separate terms apply there.

§ 1 Scope and B2B focus

These terms apply to all contracts of KANID UG (haftungsbeschränkt) (below, “KANID” or “we”) with businesses (“contractual partner”), whether concluded through the website, by email or in another way, unless something else is expressly agreed in the individual case.

Deviating, conflicting or additional terms of the contractual partner do not apply, unless we have agreed to them in writing.

B2B only: These terms apply only to businesses within the meaning of § 14 of the German Civil Code (BGB). A business also includes anyone who concludes the contract in preparation for a commercial or independent professional activity (a founder). Before the contract is concluded we clarify whether the contractual partner is acting as a business or as a consumer, and we record that in the quote. If it remains open, we treat the contract as a consumer contract; the terms for consumers then apply.

§ 2 Subject of the contract

KANID UG provides services in technical product development (concept, design and prototype building through to the pre-series prototype), 3D CAD design and modeling in Onshape, technical consulting, and additive manufacturing (3D-printed prototypes).

The concrete scope follows from the description of services in the quote or the contract.

For pure consulting services (a service contract within the meaning of §§ 611 et seq. BGB) we owe performance of the agreed service, not a specific result. For agreed work contracts (a contract for work within the meaning of §§ 631 et seq. BGB) we owe the agreed work result.

§ 3 Conclusion of the contract

Our quotes are subject to change and are not binding, unless they are expressly marked as binding. Binding in particular is the fixed-price quote for phase 2 under § 5; we hold that quote for 30 days from receipt, unless the quote states a different period for acceptance.

A contract is formed only by our confirmation of the order in text form, or by the start of performance. If the contractual partner accepts a binding quote in text form within the acceptance period, the contract is formed when the acceptance is received.

Where our website provides automated ordering or booking, an automated acknowledgement of receipt is not a binding acceptance of the order. It only records that the order arrived.

§ 4 Prices and payment

All prices are net prices plus statutory VAT.

Unless otherwise agreed, payment is by invoice, due within 14 days of the invoice date.

If payment is late, the statutory default interest for transactions in which a consumer is not involved applies (§ 288 (2) BGB).

We may require reasonable advance payments or installments if that was agreed in the contract or the quote. For product-development projects the fixed prices and payment rules in § 5 apply.

§ 5 Engagement model, scope and changes

The scope of services follows the content set individually in the quote or the contract.

We provide product development in two successive phases, each at a fixed price. Each phase is commissioned separately. Commissioning phase 1 does not oblige anyone to commission phase 2. Binding dates follow from the quote.

Phase 1 (concept & feasibility): fixed price 1,218.49 € net plus statutory VAT (1,450.00 € incl. 19% VAT), unless the quote agrees something else. Phase 1 covers the results described in the quote, in particular a requirements specification, a solution concept with sketches, a parts list with sources of supply and a short report on risks, and it ends with a binding fixed-price quote for phase 2. Phase 1 takes about 3 to 4 weeks; that figure is a non-binding guide.

Phase 2 (development through to the pre-series prototype): The fixed price for phase 2 follows from the binding fixed-price quote we issue after phase 1 is complete; as a guide, from about 5,000 € net plus statutory VAT. The fixed price includes the material for the prototypes to the extent set in the quote, and two revision loops within the meaning of the paragraph “Revision loop” below. Further revision loops are extra work. The fixed price is paid in three installments: a down payment at the start of the project, an installment after handover of the first prototype, and the final payment on acceptance. The amount of each installment follows from the quote. The first prototype is the first working prototype that is manufactured from the CAD status approved by the contractual partner and handed over or made ready for collection. Acceptance is the contractual partner’s declaration that the pre-series prototype, with the related documents, essentially conforms to the contract; otherwise § 640 BGB applies.

Partner model: Instead of installment payments for phase 2, a partner model can be agreed after KANID has reviewed the project. The contractual partner then pays only material and external costs up front; in return KANID receives a time-limited share of revenue after market launch. There is no entitlement to the partner model. It requires that the contractual partner intends to market the product as a business, including as a founder. The terms — in particular the amount, duration, basis and settlement of the revenue share, the transfer of rights in the work results, and the rule if the product does not reach the market — are agreed individually in a separate written partner agreement. That agreement prevails over these terms.

Revision loop: The fixed price covers the scope described in the quote; the measure for phase 2 is the requirements from the phase 1 specification in the version on which the quote is based. A revision loop is one pass in which the contractual partner reviews a development status we have handed over (a CAD status or a prototype), sends us the requested changes and improvements for that status together in text form, and we incorporate them and hand over a revised status. The requests in a revision loop must stay within the requirements of the specification. Removing defects — that is, deviations from the agreed scope — and test and improvement passes that we carry out ourselves in order to meet the agreed requirements do not count as a revision loop and are always included in the fixed price.

Extra work: Further revision loops beyond the two included in the fixed price for phase 2, and change requests that go beyond the requirements of the specification, are extra work. We do that work only after the contractual partner has approved it in advance in text form; before that we state the expected effort and the effect on the schedule in text form. Extra work is charged by effort at 120.00 € net per hour plus statutory VAT (142.80 € incl. 19% VAT), unless something else is agreed.

Changes or additions to the scope require text form.

§ 6 Rights in the work results

The product idea, intellectual-property rights of the contractual partner, and all documents, sketches and information contributed by the contractual partner remain with the contractual partner. We use them only to perform the contract, treat them as confidential, and pass them to third parties (for example suppliers of parts) only to the extent required for performance.

In the work results of a phase, in particular concepts, sketches, CAD data, drawings, bills of materials and STEP data, we grant the contractual partner the rights of use agreed in the quote or the contract once the remuneration due for that phase has been paid in full. Amounts the contractual partner rightfully withholds because of a defect do not prevent the transfer of rights. If nothing is agreed there, the contractual partner receives an exclusive right of use, unlimited in time, territory and content, which can be transferred, and which in particular includes further development, manufacture and commercial marketing of the product. If protectable inventions or designs arise from our development work, we transfer the rights in them to the contractual partner at the same time, including the right to file for protection (for example a patent, utility model or design right); the right of our employees to be named as inventors is unaffected. We may continue to use our general expertise and standard elements that are not specific to the project (for example standard parts, library components, design methods); the contractual partner receives a simple right of use in those, to the extent required for the product. Prototypes we have made remain our property until the remuneration due has been paid in full.

Until payment in full: Until then all rights in the work results remain with KANID. Until then the contractual partner may use the work results only to review the performance.

Under the partner model, the scope and timing of the transfer of rights follow the individual agreement (§ 5).

§ 7 Liability, and exclusion of liability for design data

We are liable without limitation for intent and gross negligence, and for injury to life, body or health.

For slight negligence we are liable only for breach of essential contractual duties. Essential contractual duties are duties whose performance makes proper performance of the contract possible in the first place, and on which the contractual partner regularly relies. In that case our liability is limited to the typical, foreseeable damage.

Responsibility for prototypes and the series product: KANID UG provides design and development services to the client’s specification and makes prototypes solely for development and testing; prototypes are not intended to be placed on the market. Unless the quote expressly agrees otherwise, the final check and release of the design for series production, the selection and supervision of manufacturers, and the conformity assessment and marking (for example CE) of the product that the contractual partner has made or places on the market, are the contractual partner’s responsibility. If third parties claim against us in product liability for such a product, the contractual partner must indemnify us in the relationship between us and the contractual partner, to the extent the damage is not based on a breach of duty for which we are responsible (§ 5 sentence 2 of the German Product Liability Act).

Liability under the Product Liability Act and under other mandatory statutory provisions, and under a guarantee we have assumed, is unaffected. The limitations of liability above also apply for the benefit of our employees and vicarious agents.

§ 8 Final provisions

The law of the Federal Republic of Germany applies, excluding the UN Convention on Contracts for the International Sale of Goods.

If the contractual partner is a merchant, a legal entity under public law or a special fund under public law, the exclusive place of jurisdiction for all disputes arising from or in connection with this contract is Stuttgart. We may also sue at the contractual partner’s general place of jurisdiction.

If a provision of these terms is or becomes invalid in whole or in part, the remaining provisions stay effective.

§ 9 Provider details

KANID UG (haftungsbeschränkt)
Heinrich-Hertz-Str. 11
70794 Filderstadt
Germany
Phone: +49 711 12287521
Mobile: +49 1520 7921611
Email: info@kanid.de

Further details are in the legal notice.

KANID UG
Filderstadt
Sheet
14 / 17
Rev.
Scale
1:1
Title
Terms for business customers
Drawing no.
KANID-WEB-2026-14
Drawn by
K. Vinogradov
Material / standard
HTML · WCAG 2.1 AA