General

Own products, the same process: what QuerLe and SoloMeter say about our product development

What we develop for ourselves follows the same path as a customer project: problem, concept, CAD, 3D-printed prototype, finished product. Three tools show what that means in practice.

Date
Reading time
4 min
Author
Konstantin Vinogradov
QuerLe, KANID’s cross-section gauge: a green-and-yellow scissor-type tool with an mm² scale from 1.5 to 120, product photo with no people

A product development does not first have to prove itself in a customer project. At KANID, our own tools follow the same path we take for startups, inventors and companies: from the problem through the concept and the CAD design to the 3D-printed prototype and a state that can be manufactured and used.

Three of these tools are public and available in our own shop. This is not about the sale — the shop is deliberately separate, on kanid-factory.de. This is about what the process shows in them.

QuerLe: a gauge that checks the cross-section

QuerLe is a cross-section gauge for electricians, fitters and planners, in a scissor form: strand or core between the two blades, read the cross-section at the bottom, from 1.5 to 120 mm². QuerLe checks the cross-section — it does not measure. The finished tool: QuerLe in the KANID Factory shop.

What the process shows: a tool comes from a concrete situation on site, not from an abstract “innovation”. The gauge is a handheld aid for checking the conductor cross-section; it is not subject to mandatory calibration. That boundary belongs in the product definition — already in the requirements specification (Lastenheft) of phase 1, not only in the marketing.

SoloMeter: photo documentation for motor-vehicle assessors

The SoloMeter is for photo documentation, for example for motor-vehicle assessors: the rule stands freely, without a hand holding it. It is not a wall holder for the workshop, but a free-standing holder for a surveyor’s folding rule (German: Geometer-Maßstab, usually just called a folding rule) — for example when recording a collision. The finished tool: SoloMeter in the KANID Factory shop.

What the process shows: the requirement comes from the working situation. That the rule stands freely and no second person has to hold it is a must-have requirement, not a comfort feature. Sentences like that later belong in the requirements specification.

SoloMeter 2.0: developing further when practice demands it

SoloMeter 2.0 is the further development of the same function: three extendable feet for uneven ground, and a built-in vial. The vial shows whether the surveyor’s folding rule is plumb. The services page states that it was developed at the request of a motor-vehicle assessor and tested together with him. The finished tool: SoloMeter 2.0 in the KANID Factory shop.

What the process shows: a first product is rarely the last word. Feedback from use changes the design — visible here in the number of feet and in the vial. That is how we work in customer projects too: test, measure, two revision loops in the fixed price of phase 2, further loops only after approval.

We tell the detailed origin story here only as far as it is already public on our pages. Further details only with explicit approval.

The same path, two brands

The design sits with KANID: idea, concept, CAD in Onshape, prototype from our own 3D printing in Filderstadt. The finished tools are sold by KANID Factory, on kanid-factory.de.

For a customer project our service offering ends at the pre-series prototype — with drawings, a bill of materials and STEP data for manufacturers. We do not manufacture the customer’s series as part of the service. Our own tools go further, into our own shop. Both follow the same development path, but a different last step.

If you have an idea of your own

The starting point is phase 1, concept and feasibility, 1,450 € including VAT, about three to four weeks, with a requirements specification, a solution concept and sketches, a parts list with sources of supply, a short report on risks, and a binding fixed-price quote for phase 2.

More on the process: Technical product development on kanid.de/en/services/

product developmentQuerLeSoloMeterCAD design3D-printed prototype

← Back to the overview

KANID UG
Filderstadt
Sheet
03 / 17
Rev.
Scale
1:1
Title
Blog · General
Drawing no.
KANID-WEB-2026-03
Drawn by
K. Vinogradov
Material / standard
HTML · WCAG 2.1 AA